![]() ![]() ![]() ReComputer J3010 and J3011 are compact edge computers that will be built with NVIDIA Jetson Orin Nano production modules and an NVIDIA Ampere architecture GPU with up to eight streaming multiprocessors, composed of 1,024 CUDA cores and up to 32 Tensor Cores for AI processing. #NewRelease □A piece of exciting news to share we’re now introducing the reComputer full system and carrier board to support the NVIDIA Embedded Jetson Orin Nano™ system-on-modules (SoMs). might change a bit later but so far this is what we've got. next will the ADC since its tied to specific pins, SPI, remaining GPIO and finally power supply (ground is last last which is why its hidden). We like to lightly route the more layout-location-sensitive parts: RF section, crystal, and QSPI. Good news is the board is tiny so PCB cost won't be a big deal. ![]() We'll need to go with a very tight DRC on this board and probably 4 layer like on the S2. so All We Gotta Do is route it to be about an inch square. we already did a module-less route of this chip on the Circuit Playground Bluefruit so we know the schem capture is right. nRF52840 is the first one with native USB - and its plenty fast as a Cortex M4 at 64MHz and 256K of RAM. Now we've got the QT Py SAMD21, RP2040 and ESP32-S2 designed and fabricated, we're going to follow up with an NRF52840 version! We've been using the series for a loooooong time (anyone else remember the nRF8001? it was like the AT90S2313 of bluetooth le for us).
0 Comments
Leave a Reply. |